|
Post by stephengroy on Aug 19, 2009 22:13:42 GMT -9
Looking for a GSD file for the 25mm Circle Bases. My GIMP skills are...well, okay, I'm a gimp.
|
|
|
Post by Sirrob01 on Aug 19, 2009 22:22:45 GMT -9
Which ones (texture wise) in particular, as i'll have to add the reg marks to print file as well as produce the gsd file...unless your happy doing that bit?? i'll be around for the next 4-5 hours
|
|
|
Post by stephengroy on Aug 19, 2009 22:26:21 GMT -9
Standard Jim's grass
|
|
|
Post by Sirrob01 on Aug 20, 2009 0:33:20 GMT -9
Okay the GSD file is attached to this post, hopefully edit: okay that didn't work I'll try and find somewhere... edit2: okay GSD and PDF file (you'll need to do right click save as) sirrob01.cogia.net/File/25mm_circles_cut.pdfsirrob01.cogia.net/File/25mm_circles.GSDI did a test cut and it worked okay for me. standard setup grey cut, red reverse, blue standard. but you may want to do the reds manually as the dot line cutting makes the tabs very floppy. Jim if your not happy with the bases being posted with the reg marks let me know and I'll pull them down asap.
|
|
|
Post by stephengroy on Aug 20, 2009 5:22:17 GMT -9
Thank you, Sir!
|
|
|
Post by squirmydad on Aug 20, 2009 9:26:48 GMT -9
I don't mind at all, eventually I can see redoing the base templates to incorporate the Craft ROBO cutting reg marks, but until at least the new year!
JIM
|
|