Taking what I've learned from designing the Smuggler's Rowboat, I'm going to aim for something just a bit larger. I'm going to create a Patrol Boat to give the smuggler something to worry about.
The construction should be basically the same, scaled up about double. I don't foresee any big problems designing the geometry. Once I get the lengths of the curves right (which involves a lot of trial and error) I should be in the clear. The masts and sails should be easy. I'm glad I don't need to create any benches, which were shockingly difficult to do for the rowboat.
If the boom leaves enough room, I'd like to include a quarter deck with a lift-away floor, and a captain's cabin under there. We'll see what I can manage.
It's also very very likely that I'll include a bonus rowboat, and of course some shipping crates.
Anyway this should also be a good choice for a small river merchant, which is the sort of thing my RPG campaigns always end up doing.
What about a bow cannon, maybe with a bronze looking octagon barrel? The wooden carriage could be done like steps.
I was thinking the same thing today. I don't think I'll include a cannon on this one (because I'm out of room on my pages) but I can see that I'll need some eventually. I'll see what I can come up with.
Hey, do you have a decent pattern for a wooden barrel? The only ones I've seen (or tried to design myself) are either too fiddly or stupid looking. I'm stumped.
I don't think there is an easy way to make one if you want it to be curved like a real one. I like to go to this site (linked below) for ideas and templates. I have been looking at this shape for a SciFi container, it's a Truncated Hexagonal Prism. With wood grain it may be usable? The only other way I think is to look at templates for globes or Hectohexecontadihedron and modify the proportions the make a true curved barrel shape.
That prismatic hexamagogical thing is neat, and I figured curves were too much to ask for. But I need to make some barrels. It's a glaring omission, or at least I think so.
What I was really hoping for was something that maintains the wooden barrel's wider-in-the-middle shape. I've designed that sort of barrel, but it's a real pain to build and you can only stack them on top of each other.
So I may bite the bullet and go with a simple short hexagonal cylinder, with straight sides. Hexagonal soda can. They're much easier to build and you can stack them standing up or laying on their sides. Ultimately, I think its utility as game terrain is what's most important.
I agree, ultimately it has to be easily built. I'm sure there is a Truncated Prism of some sort that would work, but if it take 20 minutes to build each barrel, how many people are willing to spend that much time on each one. I would suggest something with more than 6 sides. Try making one cylinder with 12 sides and see what it is like to build. To me, six sides does not create the illusion of roundness enough.
Cobra, those are exactly the sorts of boats I like and probably will be designing. They're small, they have loads of character, and they come in lots of styles.
Sounds great. I played that WFRP campaign (The Enemy Within) some years ago and was fascinated by the river boat adventuring and how they described the travels and boats in the book "River Life of the Empire" that was part of the "Death on the Reik" campaign set. There were other variations on river boats in that book (including their version of a patrol boat). I cant find that book in the chaos i call home, but if anyone here has it and will scan the boat pics, i think that would be a great help for your boat designs.
I would definitely buy your Berebeli (or whatever you end up calling it) if/when you make it.
Post by cowboyleland on Nov 6, 2010 16:02:31 GMT -9
I used these plans to make a pair of ships from cereal boxes. I was inspired by the wizkids ships to make them "constructable." I put tabs on the deck that stuck through the gun ports. I think the pieces are too big to scan and the models are at my GM's house right now anyway. If I think about it I'll bring them home next week. If I scanned them in someone out there might texture them or they might inspire Dave to explore the 18th century. Edit: I bet you all said "what plans?" Here they are:
By the way, did you ever go back to the "bulging in the middle" barrel after you settled on the octagonal design. I would think it was doable, but I'm not sure if it would be worth the fiddling.
I really isn't worth the fiddling.
The way I see it, you never want one cask, you want six. So you need to be able to build each one without too much frustration. When it comes to papercraft models, especially for games, I'll choose ease of construction over aesthetics if I can only have one.
Anyway, what I'm finding is that my eye is tricked into seeing the casks as having that bowed shape, even if they don't. The effect is even more noticeable when there a few casks piled together. So I'm happy with the end result, even if it isn't entirely realistic.
Perhaps you could use your talents to make a figure for the front ot the ship that would be layered (like everything else you do so neatly), and it could be a woman (a simple "V" style figure that would mount on the bow), and it could look gold, wood and possibly greenish brass (thinking the Statue of Liberty color).
I think that this ship would be the PERFECT RPG/gaming scale because it wouldn't take up the WHOLE gaming table, but still be large enough to put a squad or crew in and have it be mobile.
I think of this as the "Landraider" of Pirate games!
Great job... once again!
Last Edit: Nov 13, 2010 8:16:31 GMT -9 by kiladecus
Game Designer, BETA Tester, Model Designer, Figure Designer... HEY! It's what I do...
Almost done with this one. I'm happy with the sail textures, and now I need to add some rigging and a few things lying around the deck. Just about all of the other skinning work is done.
Along with a set of multi-layered pages, I'm thinking about including two single-layered versions, like I did with the Smuggler's Rowboat. The first of these is looking good, with a gold and violet color scheme. For the second, I'll probably go with a more generic fishing boat sort of thing.
cowboyleland: Now I have seen it. It doesn't advance our hobby, but anyone with half a brain who wanted 2nd rate figures could easily figure this out for themselves so I guess he isn't doing any harm.
Mar 19, 2019 17:53:59 GMT -9
berneart76: well, this is fun, (not) transferring all my papercrafting sets into the cloud. The stuff I got from DriveTrhruRPG was simple with their library desktop app,but my other stuff, sometimes with multiple duplicate copies is entertaining.
Mar 1, 2019 15:44:32 GMT -9
berneart76: Vermin King I usually use a mix of drybrush/watercolor/photocopy and occasionally posterizing at different levels of opacity.
Feb 26, 2019 20:46:54 GMT -9
berneart76: Vermin King, that's similar to the enhancing that I do on my texturing. I've found that sometimes I need to scale up or scale down the image (usually by 50 or 25 percent down or 200 or 300 percent up) to make get the enhancements to look "right"
Feb 26, 2019 20:44:53 GMT -9
Vermin King: On the zebras, I did multiple enhancements and cartoon filters and used them at 100%, and they still didn't look that different than the photos
Feb 26, 2019 12:27:26 GMT -9
Vermin King: When I make a figure or terrain piece based on a photo, I clean it up and align things to look 'right', then I create another layer and do enhancing and cartoonizing on it. I then adjust opacity over the photo image until it looks good. On the zebras,
Feb 26, 2019 12:26:35 GMT -9
Vermin King: berneart76, do you mean giving them green or purple manes and tails? and a few piercings? maybe a cig hanging out of their mouths?
Feb 26, 2019 12:24:18 GMT -9
Vermin King: cartoonizing a zebra doesn't do much
Feb 20, 2019 5:59:28 GMT -9
Vermin King: And due to the snow, I'm off tonight. I am going to miss the cash on the paycheck, but I'm glad they want their employees to be safe
Feb 15, 2019 10:52:24 GMT -9
ignatious: Actually I was referring to the two previous posts. I was trying to be subtle in order to sublimate the crassness. Read them again, but in Mel Brooks voice while he is winking, and nudging the person to his right.
Feb 9, 2019 13:38:11 GMT -9
Vermin King: Sure. Euphemize us
Feb 8, 2019 18:40:48 GMT -9
ignatious: would anyone care for a euphemism?
Feb 8, 2019 13:40:27 GMT -9
cowboyleland: We hadn't had snow for a few days. Last night the plow came down my street and did nothing but fill every ones driveways back in. Just for practice, I guess.
Feb 8, 2019 7:48:16 GMT -9
Vermin King: In KC we had an ice storm (with thunder sleet) the other night. Left things drivable, but last night the plow came down my street. They took all the rough edges off. Might as well have ran a Zamboni...
Feb 8, 2019 6:42:32 GMT -9
okumarts: Vermin King... Mind Blown!
Feb 5, 2019 19:32:30 GMT -9