Post by uptrainfan89 on Feb 26, 2012 17:46:39 GMT -9
More out of curiosity will the other colors be easy to make now that the brown drones are made? Didn't know if it was just a matter of changing base colors on the drones or repainting the whole model again, Lol.
Post by uptrainfan89 on Feb 27, 2012 14:54:04 GMT -9
Just got done building the Sniper Drone. I must say it's a fun build, tho it does have a little more to it to cut (angle wise) than a Gun or Shield Drone, but not bad at all. It looks Really good, Nice work! ;D
Here's my build photos:
Next I think I'll have to build either the Heavy Gun Drone or the Repair/Arm Drone, Lol. ;D
Post by uptrainfan89 on Jun 23, 2016 14:01:41 GMT -9
I know this is kinda reviving an old thread but is there a way to make the Gun, Shield, and Sniper Drones without layers and just with the LAU markings? I've been printing from my Google Drive from my iPad (having PC troubles) and it prints all the makings on them at once and doesn't give the option for layers (I think cause the iPad doesn't support them). If someone is up to the challenge lol!
cowboyleland: Now I have seen it. It doesn't advance our hobby, but anyone with half a brain who wanted 2nd rate figures could easily figure this out for themselves so I guess he isn't doing any harm.
Mar 19, 2019 17:53:59 GMT -9
berneart76: well, this is fun, (not) transferring all my papercrafting sets into the cloud. The stuff I got from DriveTrhruRPG was simple with their library desktop app,but my other stuff, sometimes with multiple duplicate copies is entertaining.
Mar 1, 2019 15:44:32 GMT -9
berneart76: Vermin King I usually use a mix of drybrush/watercolor/photocopy and occasionally posterizing at different levels of opacity.
Feb 26, 2019 20:46:54 GMT -9
berneart76: Vermin King, that's similar to the enhancing that I do on my texturing. I've found that sometimes I need to scale up or scale down the image (usually by 50 or 25 percent down or 200 or 300 percent up) to make get the enhancements to look "right"
Feb 26, 2019 20:44:53 GMT -9
Vermin King: On the zebras, I did multiple enhancements and cartoon filters and used them at 100%, and they still didn't look that different than the photos
Feb 26, 2019 12:27:26 GMT -9
Vermin King: When I make a figure or terrain piece based on a photo, I clean it up and align things to look 'right', then I create another layer and do enhancing and cartoonizing on it. I then adjust opacity over the photo image until it looks good. On the zebras,
Feb 26, 2019 12:26:35 GMT -9
Vermin King: berneart76, do you mean giving them green or purple manes and tails? and a few piercings? maybe a cig hanging out of their mouths?
Feb 26, 2019 12:24:18 GMT -9
Vermin King: cartoonizing a zebra doesn't do much
Feb 20, 2019 5:59:28 GMT -9
Vermin King: And due to the snow, I'm off tonight. I am going to miss the cash on the paycheck, but I'm glad they want their employees to be safe
Feb 15, 2019 10:52:24 GMT -9
ignatious: Actually I was referring to the two previous posts. I was trying to be subtle in order to sublimate the crassness. Read them again, but in Mel Brooks voice while he is winking, and nudging the person to his right.
Feb 9, 2019 13:38:11 GMT -9
Vermin King: Sure. Euphemize us
Feb 8, 2019 18:40:48 GMT -9
ignatious: would anyone care for a euphemism?
Feb 8, 2019 13:40:27 GMT -9
cowboyleland: We hadn't had snow for a few days. Last night the plow came down my street and did nothing but fill every ones driveways back in. Just for practice, I guess.
Feb 8, 2019 7:48:16 GMT -9
Vermin King: In KC we had an ice storm (with thunder sleet) the other night. Left things drivable, but last night the plow came down my street. They took all the rough edges off. Might as well have ran a Zamboni...
Feb 8, 2019 6:42:32 GMT -9
okumarts: Vermin King... Mind Blown!
Feb 5, 2019 19:32:30 GMT -9