|
Post by obsidimen1970 on Nov 10, 2011 13:51:18 GMT -9
What do folks have as their Margin settings?
Also, what are the standard Reg Mark Size settings for paper minis?
Still trying to get my cutter to work, so hoping this might help.
Thanks!
|
|
|
Post by nikloveland on Nov 10, 2011 15:47:51 GMT -9
In the latest Silhouette Studio (v2.2) I'm using registration marks in the left, top, and right of 0.395" and the bottom of 0.6". I use a size of 10mm with a thickness of 1mm. I have also been inverting them but that is my own idiosyncrasies. In the new version is a 'Reg Mark Format' but I just leave it at Auto. If you download any of the HOARD files they should have usable cut files. Even the old GSD files work in Silhouette Studio.
|
|
|
Post by oldschooldm on Nov 11, 2011 9:29:04 GMT -9
.0625" all corners (default setting) 5.0mm size (small, sometimes fails, 8mm has always worked for me) 0.5mm thick (default)
|
|
|
Post by noremorse on Nov 12, 2011 11:38:59 GMT -9
.395" (10mm) all margins 6mm length .05mm thickness
|
|