|
Post by kiladecus on Nov 11, 2011 13:07:24 GMT -9
SHUFFLER was designed to make MAPS! Here is kind of a map...
|
|
|
Post by kiladecus on Nov 11, 2011 13:09:29 GMT -9
Two MAJOR problems with this. One was my scale was WAY off! And two, I ran out of ink.
|
|
|
Post by kiladecus on Nov 11, 2011 13:15:27 GMT -9
It's too bad the scale was off... a lot of work went in to this!
|
|
|
Post by kiladecus on Nov 11, 2011 13:18:13 GMT -9
As usual, I made all of this with Shuffler... even the bases. Maybe I can make this into an Imperiax starship. The Miniatures are Dave Okum's WHERE NO MAN HAS GONE BFEORE.
|
|
|
Post by kiladecus on Nov 11, 2011 14:27:44 GMT -9
By placing the consoles directly on the ground, the keyboards and controls line up pretty well!
|
|
|
Post by kiladecus on Nov 11, 2011 14:29:36 GMT -9
All in all, once I get some more ink, I can finish this! It can actually be ANY spaceship!
|
|
|
Post by hackbarth on Nov 13, 2011 2:37:14 GMT -9
Maybe printing two pages per sheet will get you the right scale?
|
|
|
Post by kiladecus on Nov 13, 2011 4:02:22 GMT -9
Shuffler has the ability to print things out at 15mm, 25mm and 38mm. I will reprint the consoles at 15mm, and they should be perfect.
The chairs look big, because the whole figures base fits inside them. I may rework those as well, making them hal as deep.
This is all part of the learning process. Not EVERY model can turn ou the first time.
I have also learned something else. Before you make all of your elements, do one part, print it out and check the scale. Once you get that right, THEN finish all of the pieces.
This was a test with some new concepts and angles. For the most part, it DID work... just have to correct the scale. Many elements of this model I dearly LOVE!
|
|