|
Post by cowboyleland on May 5, 2012 15:23:17 GMT -9
First off, I just realised that the leftmost cannons on the top three rows have their end tabs messed up. Sorry about that. I'll try to clean that up when I have a bit more time. Anyway: Instructions When you cut them out you should slit the vertical edge of the pale triangle at the breech end of the cannon. This pale triangle will slide under the rest of the barrel later. Score both sides of the carriage in line with these vertical cuts while you have the ruler there. Also be sure to cut along the border between the the wood and the metal at the front of the carriage. At the back of the carriage, the black line under the 1/4 circle should be a slot and so should the border between the grey 1/4 circle and the white tab on the other side. Score both sides of the narrow trapezoid on each side of the barrel. These will be the tops of the gun carriage. Curl the barrel into a semi-circle, hook the back of the carriage together, curl the breech under the barrel, fold up the little black knob on the end and you should be done. I'm trying to post pictures of the finished model but I'm not having any luck. Attachments:
|
|
|
Post by cowboyleland on May 5, 2012 17:21:40 GMT -9
|
|
|
Post by kiladecus on May 13, 2012 18:01:01 GMT -9
Very nice! Great job!
|
|