|
Post by markus on May 17, 2012 7:07:06 GMT -9
Hello,
I just started making paper minis. So far it went pretty well. I found some sets in this forum which I really like and started building them. After finishing a few minis I noticed that my printouts are about 35 mm high - from feet to head. I thought this should be 30 mm models. Have I done something wrong when printing? I printed the PDFs with "no scaling" activated and used A4 sheets.
|
|
|
Post by nikloveland on May 17, 2012 9:18:38 GMT -9
This question has come up from time to time ( here, here, or here). The quick answer is the size can depend. I like to scale One Monk stuff to 90% to fit better with the Sanity Studios stuff.
|
|
|
Post by cowboyleland on May 17, 2012 10:31:49 GMT -9
As Labrat says, each designer adapts their scale a little differently. In theory the 30mm is from bottom of the feet to the eyeline, but with bent legs etc. there is a lot of artistic license.
|
|
|
Post by markus on May 18, 2012 5:23:09 GMT -9
Thanks for the quick answer.
|
|
|
Post by Sirrob01 on May 19, 2012 14:32:39 GMT -9
|
|