|
Post by hackbarth on Jul 29, 2014 17:29:00 GMT -9
I'm playing a campaign of GURPS Star Trek as an Andorian First Officer of the Intrepid Class Starship USS Nautilus. As 90% of a Trek show happens on the brdge, that would be the most important piece of terrain in the game. At first I used the bridge of the Argos III Station/Invictus Carrier from 0hr studios, but even it being a clearly Trek inspired tile, we wanted something closer to the real deal. At this point I did found this schematic of the first deck of the Voyager, containing the bridge, Ready Room, Conference Room and assorted knick-knacks: Disclaimer: I wont put full resolution images for two reasons: They are BIG (at 6000 x6800 pixels) and they use cut and paste from copyrighted sources.
|
|
|
Post by hackbarth on Jul 30, 2014 7:24:28 GMT -9
Then I turned that schematic in a BW template for the walls of the deckplan, and started cut and pasting textures and objects from the 0hr deckplans:
|
|
|
Post by hackbarth on Jul 30, 2014 7:28:47 GMT -9
I made the LCARS consoles by finding the displays on th net, pasting them on rectangles that I put a metalic like gradients and bending the result with the cage tool to conform with the curves of the hull.
|
|
|
Post by hackbarth on Jul 30, 2014 7:30:47 GMT -9
As I began to work on the bridge, I saw that it would be too difficult to make piece by piece:
|
|
|
Post by hackbarth on Jul 30, 2014 7:35:17 GMT -9
I copy pasted the entire bridge of the NX-01 from the waxingmoondesign website. I made some modifications on the bridge to conform more with a Intrepid class, like putting two seats in the command section and substituting the panels for more LCARS displays. These deckplans served to provide some pieces that I was not satisfied with too, like the bathroom:
|
|
|
Post by hackbarth on Jul 30, 2014 7:38:46 GMT -9
So that is the result, I used some deckplans from 0hr future armada, some rooms where lifted from the waxing moon design, mainly the bridge, some bits and pieces came from Mel Ebbles or were draw by hand:
|
|
|
Post by hackbarth on Jul 30, 2014 10:30:47 GMT -9
I'll list all the bits and pieces I used: Future Armada Deckplans: Argos III/Invictus, Gryphon and Cygnus pieces to be precise. ENTERPRISE NX-01 from Android Monkey Designs/Waxing Moon Design. Mostly in the Bridge, Bathroom and Office. LCARS Panels from many sources.
|
|