|
Post by Punkrabbitt on Oct 30, 2016 18:17:47 GMT -9
I will save my remaining stuff from this month for the December Procastinators Hoard. I am in the middle of finishing up moving and not quite sure when I am going to be able to do my Medieval stuff.
|
|
|
Post by mesper on Oct 30, 2016 18:26:54 GMT -9
Tomorrow is the end of the month, does anyone have anything that will need an extension? Just released new set and FREE Mini-Set for CWF users (Pumpkin Orcs) - so would need/use some additional time, like two or three days perhaps? for this hoard...
|
|
|
Post by Vermin King on Oct 30, 2016 18:35:57 GMT -9
I think that can be arranged
|
|
|
Post by mproteau (Paper Realms) on Oct 31, 2016 4:24:52 GMT -9
I'll start by compiling the non-minis as PDFs, then I'll go back and do the minis. That'll give plenty of time for finishing up any submissions that are out there. I'll post a final call before I start snapping promo pics.
|
|
|
Post by Vermin King on Nov 3, 2016 11:43:41 GMT -9
Just a bump
|
|
|
Post by Punkrabbitt on Nov 3, 2016 12:10:42 GMT -9
I will send a dropbox link to my files tonight. Who do I pm the link to?
|
|
|
Post by Vermin King on Nov 3, 2016 12:22:56 GMT -9
|
|
|
Post by Punkrabbitt on Nov 3, 2016 13:24:23 GMT -9
Kk. Give me a few hours, I am on the bus coming home from psychiatrist right now.
|
|
|
Post by squirmydad on Nov 3, 2016 14:02:51 GMT -9
Just a bump "To boldly go where no rails have gone before!"
|
|
|
Post by Punkrabbitt on Nov 3, 2016 17:11:10 GMT -9
Sent!
|
|
|
Post by mesper on Nov 4, 2016 15:43:20 GMT -9
Well I'm still not ready with this one, sorry! ... But then it seems that this Hoard would be rather "Medieval Buildings" than figurines, so perhaps no big (if any) loss...
|
|
|
Post by Vermin King on Nov 4, 2016 16:59:43 GMT -9
I can't do figures, other than repaints (and those not great) so was really looking forward to what you were working on
|
|
|
Post by squirmydad on Nov 5, 2016 11:11:41 GMT -9
Every one contributes in the way that suits them best. Having buildings gives all of those figures something to fight over.
|
|
|
Post by Vermin King on Nov 7, 2016 18:20:07 GMT -9
How long are we going to keep this open? I know mproteau (Paper Realms) has a tough week. I think this is do-able by the weekend, but the way I want to do it may not agree with some of you. I picture the frame sides being glued to tablet backing or something suitably thick. With that curve in it, I wouldn't be able to do it as a box, I don't think. Axles could be boxes. I saw those photos and I have an itch to try it. I think it could be done without being too fiddly
|
|
|
Post by mproteau (Paper Realms) on Nov 8, 2016 5:26:58 GMT -9
I vote that you do it as a separate model just contributed to the forums. That'll spare me from having to build it. :-P
|
|
|
Post by Vermin King on Nov 8, 2016 5:39:53 GMT -9
Okay, that works. How are you doing on the Inn and Guildhall?
|
|
|
Post by mproteau (Paper Realms) on Nov 8, 2016 6:17:49 GMT -9
I'm going to try to get the buildings completed tomorrow night. I'll post a picture of my end results, just to prove I exist!
|
|
|
Post by mproteau (Paper Realms) on Nov 10, 2016 4:27:21 GMT -9
I promised a picture of progress... Well, I spent the evening working with my son on his homework and boy scouts badges, so no crafting progress. Since I promised a picture, here you go.
|
|
|
Post by Punkrabbitt on Nov 10, 2016 5:16:45 GMT -9
We can post cat pictures now?
|
|
|
Post by mproteau (Paper Realms) on Nov 26, 2016 16:10:19 GMT -9
rassum frazzum
I realized I never made the cutfiles for the chimneys of the guildhall, so I whipped that up tonight and started assembling so I could snap pictures. The more intricate of the two chimneys... despite being at the hairy edge of what I'll assemble in terms of fiddly tabs, I got it assembled. Two things: first, the long edge of the angled sides don't line up with the bottom front face. It's off by a good 10mm... I'll have to download the source files again and make sure I didn't manage to screw something up. second, there's only tabs on the side, not on the front and back. I tried hacking the sides to compensate for the discrepancy I just mentioned, but that left me with too little paper, and it wasn't holding well to the roof.
I'll snap pictures with what I've got assembled. If the PDFs need updating, we can do that at any time. I'll try to finish up promo images tomorrow.
|
|
|
Post by Vermin King on Nov 27, 2016 17:20:01 GMT -9
Uh, oh, I must have messed up something after I built it, or when I tried to get cutter-friendly, I may have pulled in an old file
|
|
|
Post by squirmydad on Nov 27, 2016 22:07:32 GMT -9
It's mayhem medieval style with Forum Horde #146 - Medieval Mayhem! Get it now! LINK
|
|
|
Post by Punkrabbitt on Nov 27, 2016 22:44:07 GMT -9
Smashing!
|
|
|
Post by Vermin King on Nov 28, 2016 7:13:29 GMT -9
Thanks for getting this all together.
|
|
|
Post by chiefasaur on Nov 29, 2016 20:46:18 GMT -9
Those buildings look so good!
|
|
|
Post by Vermin King on Nov 30, 2016 4:59:56 GMT -9
Thank Tinkering Tom for the Guildhall arch Okay, the Winter version isn't happening, but I hope to do an 'Add On' kit for January. Want to add the Prague clock into it Also want to make a clock tower add-on to fit in place of one of the gables, similar to Ledbury I haven't decided whether to have it adjacent or just protruding a bit where one of the roof gables is and come up through the building. Well, look like it protrudes, but actually just fitting over the main roof and the adjacent wall
|
|
|
Post by cowboyleland on Nov 30, 2016 7:12:04 GMT -9
Great ideas, both!
|
|
|
Post by Vermin King on Nov 30, 2016 7:25:15 GMT -9
I didn't mention it, but also going to add smokestacks that can be placed pretty much wherever. Tall chimney on a brick or stone base. I was working it out for the Anheuser-Busch Brew Haus model, mostly for the generic factory version
|
|
|
Post by wyvern on Dec 1, 2016 10:20:28 GMT -9
Okay, the Winter version isn't happening, but I hope to do an 'Add On' kit for January. Want to add the Prague clock into it Would that be a working model, with minis and all?
|
|
|
Post by Vermin King on Dec 1, 2016 10:41:30 GMT -9
No, the Prague clock will not be working
|
|