shep
Eternal Member
Red Alert! Shields up! LENS FLARE!!!
Posts: 1,260
|
Post by shep on Dec 16, 2017 10:22:41 GMT -9
Today, I had to wait for a video to finish rendering, so I thought I'd use the spare time to build the (finished) transporter room, shooting some pictures along the process to later turn them into instructions... Turns out there was a little trouble with the transporter in that the floor was too short for the room. To prevent the Transporter Chief from falling through the open deck, I simply added some extra floor. However, this cannot be the permanent solution for the PDF I'll upload for you guys. So, I will lengthen the floor to fit the room. Furthermore, I found out that using 5 mm black foam core creates quite a high step on the transporter platform, so I ditched the middle step of the platform. I recommend using 2.5 mm thick grey cardboard for the step and platform, which will also result in a platform height of 5 mm. In the end, a landing party was able to beam out for some adventures...
|
|
|
Post by Vermin King on Dec 16, 2017 16:46:07 GMT -9
I know what you mean. I did some geometric changes to the Zis-5, so I'm not putting it up until I check it out
|
|