|
Post by vodswyld on Aug 24, 2010 6:13:16 GMT -9
|
|
|
Post by onemonkeybeau on Aug 24, 2010 6:54:53 GMT -9
Sweet!
Looks great!
Will you be posting the full set?
onemonkeybeau
|
|
|
Post by vodswyld on Aug 24, 2010 7:25:18 GMT -9
I'll happily post what I have. Still trying to think of what else makes sense in the army I plan to use. Here is the one I did of the Commander. I really need to clean up the rifle, but I am still learning how. I removed the hat, since really.... a hat? Rocket Launcher Grenade Launcher Sniper/Laser Rifle. I prefer Sniper. Considered putting optics on it, but trying to decide if thats appropriate or not. Flame Thrower Machine Gunner Commo unit Medic Demolitions
|
|
|
Post by old squirmydad on Aug 25, 2010 6:52:40 GMT -9
I'll happily post what I have. Still trying to think of what else makes sense in the army I plan to use. Here is the one I did of the Commander. I really need to clean up the rifle, but I am still learning how. I removed the hat, since really.... a hat? Maybe it's made of bulletcloth? I likes what you're doing, the helmet with faceplate look like good environmental protection. I recommend putting a little bit of a highlight on the armor and weapons, otherwise the colors can kind of blur together.
|
|
|
Post by vodswyld on Aug 25, 2010 7:05:42 GMT -9
Apologies, but I am still REALLY new at this. Can you explain what you mean by adding a highlight?
|
|
|
Post by old squirmydad on Aug 25, 2010 12:46:12 GMT -9
|
|
|
Post by vodswyld on Feb 24, 2011 8:19:08 GMT -9
Ok, so the hard drive these were on crashed, which is generally a bad thing. However, I discovered a thumb drive in my posession that contains all of the originals. Yay for unintended backups!
Army pages 1 and 2 will go up as soon as I can put them up somewhere. These pages contain three strips each, page 1 contains one strip of 7 troopers, one strip of 5 troopers and 2 rocket launchers, and on strip of special weapons including two machine guns, one "sniper" or laser rifle, one grenade launcher, one flamethrower, and one standard trooper.
Page 2 contains 3 strips, one with two troopers and three Officers or NCOs, one special weapons strip as above, and one strip containing a demolitions trooper, a comms trooper, and two medics.
I also just discovered that I maintained the steps of the conversions, and thus have a set in Drop Troopers grey, and a set of dudes with full face helmets in the original Terraforce green camo. A couple of the necks need touching up to make them look fully sealed, but I can post them either way if people want em.
|
|
|
Post by vodswyld on Feb 24, 2011 8:39:15 GMT -9
|
|
|
Post by Vermin King on Feb 24, 2011 8:53:40 GMT -9
Thank you very much for those
|
|
|
Post by vodswyld on Feb 24, 2011 9:19:26 GMT -9
No problem at all. I have to clean up the green camo ones some, and then I will post those too.
|
|
|
Post by old squirmydad on Feb 24, 2011 21:04:30 GMT -9
Thank you very much! ;D
|
|
|
Post by highlandpiper on Feb 24, 2011 23:25:32 GMT -9
Thanks for these!
I want to get some Grav-chutes made for these guys
|
|
|
Post by vodswyld on Feb 25, 2011 4:47:13 GMT -9
I actually use a thruster system for my drops. I was planning to put that on the model some time soon. If that is not a nightmare to do, I will see if I can do grav-chutes.
My other "to do" list is some solid leg armor. The pants look good, but I would rather have some steel there.
|
|
|
Post by bookman60 on Mar 11, 2011 10:17:08 GMT -9
I tried the links but they're all broken..
KB
|
|
|
Post by uptrainfan89 on Jul 19, 2011 10:53:39 GMT -9
Are these recolors still available?
|
|
|
Post by slayerdragonwing on Aug 19, 2011 6:27:42 GMT -9
Hello. I'm new to the boards and stumbled across these and they are perfect for an RPG campaign I was cooking up.
I was wondering if they are still available or if anyone who had saved a copy before the site went down could post them up again. I would really appreciate it.
|
|
|
Post by Rhannon on Aug 19, 2011 10:02:00 GMT -9
Hello. I'm new to the boards and stumbled across these and they are perfect for an RPG campaign I was cooking up. I was wondering if they are still available or if anyone who had saved a copy before the site went down could post them up again. I would really appreciate it. idem. ;D
|
|
|
Post by Vermin King on Aug 21, 2011 17:14:55 GMT -9
vodswyld is on with some frequency. You should probably send him a personal message on the forum
|
|
|
Post by slayerdragonwing on Sept 28, 2011 12:30:44 GMT -9
vodswyld is on with some frequency. You should probably send him a personal message on the forum I sent him a private message over a month ago and haven't heard back from him, which is odd because he's been on in that time.
|
|
|
Post by Parduz on Sept 28, 2011 12:54:36 GMT -9
vodswyld is on with some frequency. You should probably send him a personal message on the forum I sent him a private message over a month ago and haven't heard back from him, which is odd because he's been on in that time. Chance are that he did'nt see the "new message". The pop-up alerting message is an option, so it may (and have been) happen.
|
|
|
Post by Vermin King on Sept 28, 2011 13:12:02 GMT -9
And he no longer has his email displayed ...
|
|
|
Post by uptrainfan89 on Sept 28, 2011 21:37:02 GMT -9
I sent a PM to him a wile back on these too, but no answer. Darn cause these are some neat mods!
|
|
|
Post by Parduz on Sept 29, 2011 9:29:31 GMT -9
|
|
|
Post by Rhannon on Sept 29, 2011 10:40:19 GMT -9
|
|
|
Post by cowboyleland on Sept 29, 2011 18:10:16 GMT -9
|
|
|
Post by slayerdragonwing on Sept 30, 2011 13:00:59 GMT -9
Thanks a lot for posting these guys. These are awesome and I'm sure I'll get a lot of use out of them. Is there anything I should know about printing models saved in .png format? I haven't worked with that format before and I want to make sre they print out at the same size as my other figures.
|
|
|
Post by Parduz on Sept 30, 2011 13:11:29 GMT -9
As for other bitmaps, it's a matter of resolution (dpi, dot per inches). IrfanView tells me that these pictures are set to 100dpi, for a printing size of 8,5 x 11 inches. If you need to change this, just play with the DPI value, so you'll not loose quality by changing printing size.
|
|
|
Post by slayerdragonwing on Sept 30, 2011 13:41:25 GMT -9
Thanks, so I should just be able to print them without changing anything?
Sorry for all the questions, but I would rather learn it now than have to learn it by making mistakes later.
|
|
|
Post by slorm on Oct 1, 2011 12:33:26 GMT -9
Another army for the printer!!!
|
|
|
Post by vodswyld on Oct 16, 2011 8:11:34 GMT -9
Sorry guys. Lotsa stuff blew up.
I recently redid the medics and commanders, so will try and post those when I get back home, as well as post the original pages again.
|
|