Post by oldschooldm on Nov 29, 2011 0:41:09 GMT -9
I will keep the following link updated with the latest version of my studio cutfiles for this project. Below this link is the current README.txt file contents:
www.dropbox.com/s/n0h2ioltiaxdrpe/Afet%20Enlarged%20ShadowWolf%20Trireme%20Cutfiles.zip?dl=0
--- README.txt ---
Archive and Studio Cutfiles created by OldSchoolDM at Cardboard Warriors (and oldschooldm on Twitter)
Artwork and original model by ShadowWolf: mmiparchive.papermakeit.com/13%20-%20Fantasy%20Naval.html
Afet and CowboyLand each released enlarged versions that you can find on this thread: cardboard-warriors.proboards.com/index.cgi?board=cowboyleland&action=print&thread=3366
I had a slight preference for Afet's blowup, and so I created these Studio cut files. Since the model is free, I embedded Afet's blowups directly into the file - so print them from Studio to add the appropriate registration marks.
These files have been printed and cut by me personally, so if you encounter any problems, blame me. :-)
There are two cutfiles missing at this point: One for the oars (I'm not sure how these mount to the ship, so I don't know where to put any score-lines. Afet used the mast from WWG's The Maiden, www.worldworksgames.com/store/index.php?view=product&product=24 which is copyrighted material. I'm looking for a suitable substitute and will add it and a cut file when I find one.
So far, there are no instructions for this build. You'll need to overlap the decking and also the sides a compatible amount, so build the hull first and then the decking, hand fitting to find out the overlap.
If someone wants to mod these files to better make the overlap clearer/easier, have at it!
OldSchoolDM
--- EOF---
www.dropbox.com/s/n0h2ioltiaxdrpe/Afet%20Enlarged%20ShadowWolf%20Trireme%20Cutfiles.zip?dl=0
--- README.txt ---
Archive and Studio Cutfiles created by OldSchoolDM at Cardboard Warriors (and oldschooldm on Twitter)
Artwork and original model by ShadowWolf: mmiparchive.papermakeit.com/13%20-%20Fantasy%20Naval.html
Afet and CowboyLand each released enlarged versions that you can find on this thread: cardboard-warriors.proboards.com/index.cgi?board=cowboyleland&action=print&thread=3366
I had a slight preference for Afet's blowup, and so I created these Studio cut files. Since the model is free, I embedded Afet's blowups directly into the file - so print them from Studio to add the appropriate registration marks.
These files have been printed and cut by me personally, so if you encounter any problems, blame me. :-)
There are two cutfiles missing at this point: One for the oars (I'm not sure how these mount to the ship, so I don't know where to put any score-lines. Afet used the mast from WWG's The Maiden, www.worldworksgames.com/store/index.php?view=product&product=24 which is copyrighted material. I'm looking for a suitable substitute and will add it and a cut file when I find one.
So far, there are no instructions for this build. You'll need to overlap the decking and also the sides a compatible amount, so build the hull first and then the decking, hand fitting to find out the overlap.
If someone wants to mod these files to better make the overlap clearer/easier, have at it!
OldSchoolDM
--- EOF---