|
Post by Punkrabbitt on Nov 14, 2016 1:56:49 GMT -9
Here we go, NCC-2000 U.S.S. Excelsior: Excelsior PDF And here's a funny thing... I thought I was working in 1/5000 scale but things must have printed a little large because after I created this thing in 1/5000, I had to enlarge it quite a bit to match the rest of my paper Star Trek ships... closer to 1/3920, which is a really odd size. Oops. I hope to have some build shots by the weekend.
|
|
shep
Eternal Member
Red Alert! Shields up! LENS FLARE!!!
Posts: 1,260
|
Post by shep on Nov 14, 2016 2:32:44 GMT -9
The difference in scale might come from differing resolutions. Make sure you create all ships in the same resolution, 300dpi should work best, giving you max quality for printing...
|
|
|
Post by Punkrabbitt on Nov 16, 2016 18:01:21 GMT -9
The difference in scale might come from differing resolutions. Make sure you create all ships in the same resolution, 300dpi should work best, giving you max quality for printing... I am pretty careful in my 300 dpi... all of the ships are the same scale, just not the scale I thought they were
|
|
|
Post by Punkrabbitt on Nov 16, 2016 18:03:33 GMT -9
Excelsior, built! My lamp over the table is giving the top surfaces some funky colours, though...
|
|
shep
Eternal Member
Red Alert! Shields up! LENS FLARE!!!
Posts: 1,260
|
Post by shep on Nov 16, 2016 21:50:42 GMT -9
Looks nice...
|
|
|
Post by Punkrabbitt on Nov 16, 2016 21:55:55 GMT -9
Thank you!
|
|