|
Post by Punkrabbitt on Dec 4, 2023 18:54:11 GMT -9
Are there any of those 4-rotor flying drines around in 28mm? I imagine it would be about the size of a person's torso, probably a simple fold over.
Thank you.
|
|
|
Post by Punkrabbitt on Dec 4, 2023 20:16:08 GMT -9
Something like this, only nicer. And maybe in a spiffy military green color or something.
|
|
|
Post by Vermin King on Dec 5, 2023 5:40:47 GMT -9
I think you are off to a good start yourself.
Are you looking for a recon drone or attack?
|
|
|
Post by Punkrabbitt on Dec 5, 2023 7:17:00 GMT -9
I think you are off to a good start yourself. Are you looking for a recon drone or attack? I am looking for something to use in my Kill Process Sample game as a military drone. I can figure out mounting a small pistol on the bottom after it is otherwise assembled. I could just as easily use R2-D2, a Cylon, or whatever robotic thing I have laying about but I like the little four-rotor things. I have a "Drone Controller" Specialist in my Gang that may start each scenario with a free "Military Drone" armed with a heavy pistol. There are no further specifics on the drones themselves aside from moving 1" faster than a bog-standard human.
|
|
|
Post by Vermin King on Dec 5, 2023 9:27:08 GMT -9
|
|
|
Post by squirmydad on Dec 5, 2023 17:00:53 GMT -9
|
|
|
Post by ignatious on Dec 5, 2023 19:30:47 GMT -9
Could something like this work for you?
|
|
|
Post by Punkrabbitt on Dec 5, 2023 19:36:46 GMT -9
|
|
|
Post by ignatious on Dec 5, 2023 21:09:51 GMT -9
I really don't like making layered pdfs, but I think I might be hooked. That being said, here is a pdf with layers so you can toggle off the top, and bottom stuff, for a less flashy(?) version. A layer for dirt, one to turn the stripes off, and a green camo one. ...well there was going to be a pdf but postimage isn't working right now, so I'll have to come back and try again later. ...ok here it is. droneHere is a shot with some other droids. ...and the underside
|
|
|
Post by ignatious on Dec 6, 2023 10:30:17 GMT -9
Apparently I kept screwing up the link, but I think I have it right now. Let me know if it is working for you. After rereading the first post agian I noticed you mentioned torso sized. This may be a little big, but that should be dealt with fairly easily.
|
|
|
Post by Vermin King on Dec 6, 2023 13:33:47 GMT -9
This may not be the answer you are looking for, but Stark White looks really good, too
|
|
|
Post by cmd_line_cody on Dec 9, 2023 8:50:17 GMT -9
Looks great! Have you considered using some transparency film or a piece of clear plastic cut from clamshell packaging to make a flight stand?
|
|
|
Post by ignatious on Dec 9, 2023 13:42:29 GMT -9
Looks great! Have you considered using some transparency film or a piece of clear plastic cut from clamshell packaging to make a flight stand? Funny you should ask cmd_line_cody. I had this drying overnight.
|
|