|
Post by abaddonwormwood on Jun 25, 2009 14:05:24 GMT -9
Using P-Shop: I am working with tiles that are 300dpi and items that are 200dpi - what can I do to place them together scaled correctly? Both these are scaled at the 28/30mm level but I am then reducing them down to 15mm..... just to be confusing.
Lord Abaddon of Wormwood
|
|
|
Post by Floyd on Jun 25, 2009 14:19:03 GMT -9
Ab, Since you are going to retrofit this all in 15mm scale. You could just scale down the 300dpi to 200. And then convert for 15mm with no real discernible detail loss.
~F
|
|
|
Post by abaddonwormwood on Jun 25, 2009 14:43:47 GMT -9
Was just coming back to delete this as it was a tad of a thoughtless post - when opening the 200dpi, photoshop asks what rez. my default is 300 - so it scales up automaticly - correct?
If not I will do as you suggest Floyd - very good thought.
Lord Abaddon of Wormwood
|
|
|
Post by abaddonwormwood on Jun 25, 2009 14:47:13 GMT -9
To subnote myself:
The 300dpi is WWG textures - so I am dropping the scale down by 50%. The other line is more 28mm so reduction down to 65%.
Lord Abaddon of Wormwood
|
|