|
Post by tirick on Aug 9, 2010 16:18:16 GMT -9
I'm nearly finished another paper figuring for my Paper Protagonist line. I probably will not get a full figure assembled for another week or so, but here are some shots of the final rendered images. The figures at 1:50 are about 3.5 cm tall, while the 1:35 are about 5.4 cm. The E-11's will both be made available in the release. Technically the top one is the correct size, but it looks too small to my modeler's eye. That may be the 40K player in me talking of course... Once done this will be available for free in my store at tcfgaming.comEnjoy! Tirick
|
|
|
Post by tirick on Sept 17, 2010 15:28:34 GMT -9
Whesh... long time between posts. I blame my total lack of focus (and video games). Nevertheless I've finished build #1 of the print candidate, and I am satisfied with the build-up sufficiently to prepare instructions and upload, hopefully within a week. I had some trouble with the helmet, which actually looks a little large upon build, but it is snug enough to sit mostly still on the head without gluing. The process of building is a little longer than typical as there is a lot of lamination. The base figure is black, so all of the areas that are white, save the feet, are laminated as much as 2 layers deep. This will provide an excellent base for future 'trooper types, which will either be Scouts or Clones Phase I. It also gives some insight into how a full armoured knight figure will work, which is a bonus. What follows is a build diary. I'll keep the pic/link ratio low so you don't have to scroll too much... Enjoy! Tirick The PileStarting with the Legs/Torso assemblyContinuing with laminationMore laminationLegs fininshedLimbs and torso finishedArms Posing with blasterLegs/Torso and ArmsBack SideWith helmet (horrible angle)And finally a comparison betwen (in order from left-right): My original Trooper design, the new Protagonist, WotC Plastic 35mm: Another angle
|
|
|
Post by mruseless on Sept 18, 2010 6:48:12 GMT -9
Holy cow! I can't imagine building one of these, just looking at "The Pile". If you were to see my workspace in the middle of a project, you would understand! I'd never be able to find the pieces.
Fantastic work!!
|
|
|
Post by labrat on Sept 21, 2010 1:54:57 GMT -9
Those are way cool man!
|
|
|
Post by Reivaj on Sept 21, 2010 6:05:26 GMT -9
Espectacular!! Excelent work! congratulations ;D
|
|
|
Post by tirick on Sept 27, 2010 15:52:07 GMT -9
;D These are now available in my store (for free) for anyone willing to brave the assembly. Enjoy! Tirick
|
|
|
Post by WaffleM on Sept 29, 2010 9:00:16 GMT -9
I can't even imagine how to start tackling designs like yours! You are just awesome, insane, and amazing!!! You're AWESANEZING!
|
|