Post by oldschooldm on Dec 1, 2011 22:35:50 GMT -9
dl.dropbox.com/u/3838990/Megalith%20Circle%20Cutfiles.zip
Here they are. This link will always point to the latest versions of these cutfiles. Readme.txt after the build images:
More images at photobucket.com/ancientworlds
--- Read Me.txt ---
Cutfiles for Ancient Worlds - Megalith Circle From Lord Zsezse Works, available at www.rpgnow.com/product_info.php?products_id=94330 You will need to buy a copy of that product to use these correctly (see the instructions below) the artwork is not included to protect the rights of the copyright holders.
These cutfiles were created with Silhouette Studio version 2.2.0 by OldSchoolDM @ the Cardboard Warriors forums: cardboard-warriors.proboards.com/
Instructions:
The Megalith Circle is distributed as a 2-page PDF, but does not have the required registration marks to work with the cutter.
In order to get the registration marks in the correct place relative to the cutting lines in these files, you will need to print from within the Studio program itself after merging the artwork.
Step one: Get each page of the PDF art into individual PNG files, so Studio can read them. There are several choices of ways to do this.
If you have Adobe Acrobat Pro, you can use the Extract tool to split into seperate PDFs, and then load each an use Save As > Image > PNG.
If you want to customize the layers (There are Grey and Swamp-green versions), you can print-to-PDF after selecting the layers. Then you still have to convert each PDF into a PNG.
If you don't have Acrobat Pro, another means to move PDF -> PNG is using the GIMP editor. When you open a PDF with GIMP, you can specify which pages to import. Be sure to set the resolution to 300 DPI on the import dialog! Once it is open, save the page with a .PNG file (by typing in that suffix), no compression.
Now you need to merge the PNG file swith their cutfiles to get the registration marks right when you print...
[The remaining instructions are specific for Studio 2.2.0]
Step two: Now you have PNG files for each page, start Studio and then open one of them (you won't see the PNG files by default in the open dialog, click the file-type pop-down and chose PNG to see them).
Once you see the image on simulated carrier sheet, you may see it rotated 90-degrees (not fitting on the sheet), just click Portrait on the Page control to rotate the carrier sheet to match.
Next choose Merge from the file menu and select the matching cutfile page. You should see red-lines overlaying the image, they probably won't align properly at first.
Step three: Align the image to the cutlines. Zoom in 3-4 times by clicking on the +magnifier at the top of the screen.
The lines are in the correct place, it is the image that needs to move to match. Click on the image (including white area) somewhere, and use the arrow keys to shift the image until it matches the cut lines. I'd save the cutfile at this point.
Step four: Print the file and cut! Choose the printing option from within Studio - either from the File menu or as the first option after clicking on the Cut icon at the top of Studio - it will include the registration marks from the cutfiles. Then you know the drill, mount to carrier sheet and cut!
Have fun, and if you got these files from the Forums, please post a photo of your build! The thread I created is a great place to leave feedback and comments.
Here they are. This link will always point to the latest versions of these cutfiles. Readme.txt after the build images:
More images at photobucket.com/ancientworlds
--- Read Me.txt ---
Cutfiles for Ancient Worlds - Megalith Circle From Lord Zsezse Works, available at www.rpgnow.com/product_info.php?products_id=94330 You will need to buy a copy of that product to use these correctly (see the instructions below) the artwork is not included to protect the rights of the copyright holders.
These cutfiles were created with Silhouette Studio version 2.2.0 by OldSchoolDM @ the Cardboard Warriors forums: cardboard-warriors.proboards.com/
Instructions:
The Megalith Circle is distributed as a 2-page PDF, but does not have the required registration marks to work with the cutter.
In order to get the registration marks in the correct place relative to the cutting lines in these files, you will need to print from within the Studio program itself after merging the artwork.
Step one: Get each page of the PDF art into individual PNG files, so Studio can read them. There are several choices of ways to do this.
If you have Adobe Acrobat Pro, you can use the Extract tool to split into seperate PDFs, and then load each an use Save As > Image > PNG.
If you want to customize the layers (There are Grey and Swamp-green versions), you can print-to-PDF after selecting the layers. Then you still have to convert each PDF into a PNG.
If you don't have Acrobat Pro, another means to move PDF -> PNG is using the GIMP editor. When you open a PDF with GIMP, you can specify which pages to import. Be sure to set the resolution to 300 DPI on the import dialog! Once it is open, save the page with a .PNG file (by typing in that suffix), no compression.
Now you need to merge the PNG file swith their cutfiles to get the registration marks right when you print...
[The remaining instructions are specific for Studio 2.2.0]
Step two: Now you have PNG files for each page, start Studio and then open one of them (you won't see the PNG files by default in the open dialog, click the file-type pop-down and chose PNG to see them).
Once you see the image on simulated carrier sheet, you may see it rotated 90-degrees (not fitting on the sheet), just click Portrait on the Page control to rotate the carrier sheet to match.
Next choose Merge from the file menu and select the matching cutfile page. You should see red-lines overlaying the image, they probably won't align properly at first.
Step three: Align the image to the cutlines. Zoom in 3-4 times by clicking on the +magnifier at the top of the screen.
The lines are in the correct place, it is the image that needs to move to match. Click on the image (including white area) somewhere, and use the arrow keys to shift the image until it matches the cut lines. I'd save the cutfile at this point.
Step four: Print the file and cut! Choose the printing option from within Studio - either from the File menu or as the first option after clicking on the Cut icon at the top of Studio - it will include the registration marks from the cutfiles. Then you know the drill, mount to carrier sheet and cut!
Have fun, and if you got these files from the Forums, please post a photo of your build! The thread I created is a great place to leave feedback and comments.