Post by mproteau (Paper Realms) on Jul 28, 2015 11:38:25 GMT -9
Product: Darkfast Dungeons: Mice & Rats Set Two by Okumarts
Cutfiles: MR_002_cutfiles.zip (325.88 KB)
NOTE: The layout of the pages containing cards overlaps some of the "do not put graphics here" area by one of the registration marks, and this may cause trouble for the machine when reading the mark. If you're worried, you have a couple options. First, you can cut these pages by hand. Of everything, these are the easiest things to cut by hand! Alternatively, you can bring the pages into Silhouette Studio any way you know how and move the graphics and cut lines down on the page. If you do this, bring the graphics in WITHOUT the registration marks from the PDF so you can print from within Studio.
You will need to download a copy of that product to use these correctly. The artwork is not included to protect the rights of the copyright holders.
NOTE: When possible, turn off all extraneous layers, like text layers! You need to make sure that there no graphics interfere with the registration marks. If you forget, you can probably get away with creating white shapes in the Studio software that cover up the offending graphics. I've learned you can even use the eraser tool in the Studio software, too!
The product contains the required registration marks to work with the cutter. All you need to do is make sure to select the correct layers before printing. Moreover, make sure you've selected the correct style of registration marks from within the Silhouette Studio software.
These cutfiles were created with Silhouette Studio version 3.3.638ss by mproteau (Paper Realms) @ the Cardboard Warriors forums: cardboard-warriors.proboards.com
Cutfiles: MR_002_cutfiles.zip (325.88 KB)
NOTE: The layout of the pages containing cards overlaps some of the "do not put graphics here" area by one of the registration marks, and this may cause trouble for the machine when reading the mark. If you're worried, you have a couple options. First, you can cut these pages by hand. Of everything, these are the easiest things to cut by hand! Alternatively, you can bring the pages into Silhouette Studio any way you know how and move the graphics and cut lines down on the page. If you do this, bring the graphics in WITHOUT the registration marks from the PDF so you can print from within Studio.
You will need to download a copy of that product to use these correctly. The artwork is not included to protect the rights of the copyright holders.
NOTE: When possible, turn off all extraneous layers, like text layers! You need to make sure that there no graphics interfere with the registration marks. If you forget, you can probably get away with creating white shapes in the Studio software that cover up the offending graphics. I've learned you can even use the eraser tool in the Studio software, too!
The product contains the required registration marks to work with the cutter. All you need to do is make sure to select the correct layers before printing. Moreover, make sure you've selected the correct style of registration marks from within the Silhouette Studio software.
These cutfiles were created with Silhouette Studio version 3.3.638ss by mproteau (Paper Realms) @ the Cardboard Warriors forums: cardboard-warriors.proboards.com
