|
|
Post by nullpointer on Aug 25, 2017 15:03:32 GMT -9
Here's the un-textured design. I will try to get the fully textured version printed out and put together soon.  Here's a link to the finished template. |
|
|
|
Post by Vermin King on Aug 25, 2017 16:17:13 GMT -9
Nifty. I was seriously hoping my steam carriage wouldn't be the first model posted. I had a bit of an issue trying to download the file, but I will try again later tonight.
|
|
|
|
Post by oldschooldm on Aug 25, 2017 17:05:41 GMT -9
Here's the un-textured design. I will try to get the fully textured version printed out and put together soon. Here's a link to the finished template. You are going to enter this in the Paper Cuts awards, right? You've got just a few more days! |
|
|
|
Post by nullpointer on Aug 26, 2017 7:35:49 GMT -9
Yep, I have all the pieces designed and made pretty, and the proof-of-concept means it can work, I only made a few small improvements to the final design. Unfortunately, I'm stuck on my B&W printer, which would work in a pinch but I hope to get a different solution figured out this weekend. Then I can get the fully textured version printed up and assembled to photograph.
Would a PDF be preferable over a zip file of the JPEG pages, or will squirmydad fix it in "post"?
|
|
|
|
Post by Vermin King on Aug 27, 2017 16:15:25 GMT -9
I generally try to post both ways. I used to only post png's, and then I realized that others had to do the work of formatting for pdf, so I have tried to make that a little easier for them
|
|
|
|
Post by nullpointer on Aug 27, 2017 22:30:13 GMT -9
I'm not sure I will be able to put together a multi-page PDF that maintains the correct scaling... I will try. Anyway, here's preliminary images of the tower, I just finished the build and it's dark out so I will take better images of the entry in the morning. Hopefully something more suitable for judging.  And then here's how it looks like closed and folded up. It has an internal rubberband mechanism so it automatically pop-out to the 3/d shape from this collapsed state.  As you can see I made it with a double door, arrow slits, and then a single door on the back side, but I will be including a sheet of different architectural features so that the builder can change up its appearance to their liking.  |
|
|
|
Post by Vermin King on Aug 28, 2017 4:24:34 GMT -9
That looks very good. I wouldn't stress too much on the pdf.
|
|
|
|
Post by nullpointer on Aug 28, 2017 23:36:37 GMT -9
I got the PDF working. Here's the final submission, suitable for judging!  Download Plans (instructions Included) |
|
