|
|
Post by Papercraft Warrior on Jan 22, 2018 7:00:04 GMT -9
The universe decided it needs more Genet models variations. From my own experience, and that of other people, the models most wanted are those that... look good and are easy to build. In that name, I started another EASY BUILD project. I present you the: 6x6 ARMORED PATROL VEHICLE - EASY BUILDI will publish finished files in a day or two. In the meantime, here is a (low resolution) teaser: Only the three tan parts are necessary to build the model, the fourth one is optional. Most of the time, people should not notice the difference between this and the full-bloodied model.  |
|
|
|
Post by cowboyleland on Jan 23, 2018 4:47:26 GMT -9
The optional piece is the floor between the wheels?
|
|
|
|
Post by Vermin King on Jan 23, 2018 5:00:48 GMT -9
Connects across the 'wheel-less' space underneath
I'm not sure how to get this to fit in a cutter-friendly space. We'll have to wait and see
|
|
|
|
Post by Papercraft Warrior on Jan 23, 2018 7:55:18 GMT -9
Here is the old Ebbles Tan paint job.
I left the wheels bottom free, so you can print out third page from the original 6x6 APV, and glue them inside if you wish 3D wheels. They would have been on the base page, but for the lack of space.
Any comments, impressions or images of built model are welcome.
|
|
|
|
Post by Vermin King on Jan 23, 2018 10:39:27 GMT -9
Very tight fit, but it fits  |
|
|
|
Post by Papercraft Warrior on Jan 23, 2018 13:20:13 GMT -9
Well done, I thought it will not fit without downsizing.
|
|
|
|
Post by Vermin King on Jan 23, 2018 13:23:46 GMT -9
Not much wiggle room. Had to move the main title to the side and crowd things a little, but I didn't have to re-size it. Whew!
|
|
|
|
Post by Papercraft Warrior on Jan 23, 2018 13:30:54 GMT -9
I'll use the png as a backdrop for other paintschemes, so rest of them will be hoard formated pdfs.
28mm wargaming here we come!
|
|
|
|
Post by Vermin King on Jan 23, 2018 13:38:00 GMT -9
Unfortunately the pdf is too large to add as an attachment
|
|
|
|
Post by Vermin King on Jan 23, 2018 17:47:28 GMT -9
the 6X6 Easy Build sits awfully high to not reinforce the wheels. If you don't print off wheels for the back, you will at least want to paste some scrap behind the wheels to give a little extra strength
|
|
|
|
Post by Papercraft Warrior on Jan 24, 2018 8:43:29 GMT -9
Another one ready for rumble!Preview of SIBERIA edition 
|
|
|
|
Post by Vermin King on Jan 24, 2018 8:52:24 GMT -9
Formatted and everything!
My bumper pool table is seriously looking like a motorpool now
|
|
|
|
Post by Papercraft Warrior on Jan 24, 2018 10:00:45 GMT -9
Your cats gonna get overrun.
|
|
|
|
Post by Papercraft Warrior on Jan 25, 2018 6:10:52 GMT -9
Caterminator reporting for duty!
Preview of IMPERIAL GREY edition 
|
|
|
|
Post by Papercraft Warrior on Jan 29, 2018 3:10:10 GMT -9
Do you need army green for your ground pounders? Look no more, HELO DRAB is 'ere! HELO DRABAttachment upload limit for the forum is filled, so I must use webhosting. I placed it on dropfile.to because it expires in 24h. Why? Roe expressed his wish for mods of Genet models to be hosted only on the forum, and on the onemonk.com This way, the admins have time enough to download it, and put it in the hoard pile. Long term it will be available only on the onemonk.com (hoard files repository). If you do not get it from this link on time, go to Forum Hoards 2018, and get it from the motorpool hoard archive. |
|
|
|
Post by squirmydad on Feb 11, 2018 9:41:03 GMT -9
Thanks, got it!
|
|
