|
Post by oldschooldm on Apr 19, 2020 20:11:03 GMT -9
I'm kitbashing jjensen's Magic Emporium, and I want to put in a nest for a familiar in the rafters. Do any of you know of a model for a nest? I can scale up/down as needed and might even modify it to fit the space, but would really like this model - I've had a need several times before and come up short...
|
|
|
Post by alloydog on Apr 19, 2020 21:15:44 GMT -9
You mean like a bird's nest? I just did a quick and dirty one - found an image of some straw, copy/pasted a few times at various angles in GIMP. As is, it comes out at about 15 mm diameter at the base. I made the base 16 mm to allow for wibbly-wobblyness and trimming. It is slightly wider at the top than the bottom.
|
|
|
Post by oldschooldm on Apr 20, 2020 7:19:39 GMT -9
You mean like a bird's nest? I just did a quick and dirty one - found an image of some straw, copy/pasted a few times at various angles in GIMP. Thanks for this!
|
|
|
Post by alloydog on Apr 20, 2020 7:51:13 GMT -9
You mean like a bird's nest? I just did a quick and dirty one - found an image of some straw, copy/pasted a few times at various angles in GIMP. Thanks for this! You're welcome.
|
|