|
Post by glennwilliams on Feb 13, 2012 12:18:06 GMT -9
Finger and Toe Models announces the release of its second “ACTION FIGURE” terrain set, L.I.A.M. (Large Interactive Action figure Modules). This PDF card stock set can be used to build a secret headquarters, an evil lair, a hidden laboratory, or just a really dangerous neighborhood for your 3 3/4" action figures to explore. It can be added to the previous Finger and Toe action figure release, OUTLANDS, for even more variety. This set was actually proposed by a seven-year-old named Liam who wanted more places to play with his action figures. He produced a simple paper half cube, and that was the genesis of L.I.A.M.: Core Modules. This set is designed so that you only need scissors (with ONE exception: the slit in the door), so with adult supervision a younger gamer should be able to assemble it. Build four module level then stack and connect with bridges to create a stage for your adventures. A basic core module is a five inch cube, so a four module level is ten inches square and five high. For a slide show go to www.fingerandtoe.com. Remember, every Finger and Toe model comes with SMOOSH ASSURANCE: if ya’ll smoosh your L.I.A.M.: Core Modules, a new set waits your summons from hard drive and printer. L.I.A.M.: Core Modules is available from www.rpgnow.com or www.wargamevault.com for $3.50. The slideshow can be seen here: www.fingerandtoe.comBuy it here: www.wargamevault.com/product_info.php?products_id=99468&src=FrontPageUploaded with ImageShack.us
|
|
|
Post by Christopher Roe on Feb 13, 2012 20:52:00 GMT -9
That's some seriously cool stuff right there, and I wish that sort of stuff had existed back when I was a kid.
|
|
|
Post by Vermin King on Feb 14, 2012 9:31:47 GMT -9
I've still got my Major Matt Mason Moon Base and Lunar Crawler, which still works. Something like this would really up Play Time.
|
|
|
Post by Parduz on Feb 14, 2012 9:52:35 GMT -9
WOW! I have to dig out that old Necromunda box, one of these days.....
Glenn, i have two question: How much is hard to build the floors on foamcore instead of making the "boxes" you have designed? AND Are the "columns" 2D-L-Shaped or full 3D?
Thanks!
|
|
|
Post by glennwilliams on Feb 14, 2012 11:49:14 GMT -9
WOW! I have to dig out that old Necromunda box, one of these days..... Glenn, i have two question: How much is hard to build the floors on foamcore instead of making the "boxes" you have designed? AND Are the "columns" 2D-L-Shaped or full 3D? Thanks! It should be easy to.mount on foamcore by printing on label sheets. Then separating the walls. Roof and floor are same texture, so just print two floors. The columns are 3D. One half inch wide support mounted 45 degrees should be able to replace and aaccept.the column side glued to it.
|
|
|
Post by glennwilliams on Feb 14, 2012 12:41:18 GMT -9
Here's a quick render of what I meant in my reply to Parduz. Uploaded with ImageShack.usBecause the core modules weren't designed for foam core, there will be some fiddling required, but I think it's doable (with chipboard as well).
|
|