|
Post by Vermin King on Jul 30, 2016 6:38:28 GMT -9
|
|
|
M11 4X4
Oct 12, 2017 6:17:47 GMT -9
Post by Papercraft Warrior on Oct 12, 2017 6:17:47 GMT -9
I am late to the party, but... what is a year compared to eternity?
Builds look nice, with straight surfaces hiding the fact they are made of paper. The weapon barrels pleasantly surprised me, for such small bits they turned out splendid.
Passing of the year draws close, and I am thinking about gathering materials for the print shop run.
Are the upgrade bitz available for download, they escaped my attention? I think there were some others for the 4x4 GPV as well, on the old Ebbles forum.
|
|
|
M11 4X4
Oct 12, 2017 6:36:11 GMT -9
Post by Vermin King on Oct 12, 2017 6:36:11 GMT -9
The GPV upgrades are in the 2010-2011 Section. The M11 upgrade kit isn't on his site. I think he said we can post mods and things here, but I'll have to double check that
|
|
|
M11 4X4
Oct 12, 2017 7:42:22 GMT -9
Post by Papercraft Warrior on Oct 12, 2017 7:42:22 GMT -9
For GPV, 2010-2011 page has the weapon pack, and the round wheels are inside the GPV zip, but there is no backtrunk mod, not the opentop back mod. Could have been just kitbash images on the old forums, without the build files.
I am thinking about modding a few things myself, but it might not be wise, I still have not built all the items I printed out before the last new year.
|
|
|
Post by Vermin King on Oct 12, 2017 8:19:10 GMT -9
|
|
|
M11 4X4
Oct 12, 2017 8:55:22 GMT -9
Post by Papercraft Warrior on Oct 12, 2017 8:55:22 GMT -9
Thank you for the upgrade files.
What I saw for the GPV must have been a conversion then. I remember it having additional (bulging) armor at the doors and the open top cargo zone at the back. Looked nice, too bad I didn't save the images before forum went the way of the dodo.
|
|
|
M11 4X4
Oct 12, 2017 9:08:52 GMT -9
Post by Vermin King on Oct 12, 2017 9:08:52 GMT -9
That was a while back, but I think Chris was the one talking about doing that variant. I'm probably wrong, though
|
|
|
M11 4X4
Oct 15, 2017 8:14:57 GMT -9
Post by squirmydad on Oct 15, 2017 8:14:57 GMT -9
For GPV, 2010-2011 page has the weapon pack, and the round wheels are inside the GPV zip, but there is no backtrunk mod, not the opentop back mod. Could have been just kitbash images on the old forums, without the build files. I am thinking about modding a few things myself, but it might not be wise, I still have not built all the items I printed out before the last new year. I think the open-top back mod was done by emergencyoverrideI have a build of it somewhere.
|
|
|
Post by Vermin King on Oct 16, 2017 3:45:24 GMT -9
See, told you I was probably wrong
|
|
|
Post by Papercraft Warrior on Oct 16, 2017 3:52:53 GMT -9
See, told you I was probably wrong I tend to disagree, you see, you were right about being wrong. Thus, in the end, you were still right.
|
|
|
Post by Vermin King on Oct 16, 2017 4:10:02 GMT -9
Well, to tell you the truth, that's the reason I admit to being wrong so much. It takes some of the bruising away when I'm wrong.
|
|
|
Post by squirmydad on Oct 17, 2017 17:06:40 GMT -9
Found the 4x4 pickup mod pictures, now to find the file...
|
|
|
M11 4X4
Oct 17, 2017 17:23:12 GMT -9
Post by Vermin King on Oct 17, 2017 17:23:12 GMT -9
And sitting in front of Tommygun's Big Building, the modern concrete version
|
|
|
Post by Papercraft Warrior on Oct 17, 2017 17:38:36 GMT -9
Found the 4x4 pickup mod pictures, now to find the file... It looks nice. I am not sure if my skill and "equipment" are up to the task of building it as depicted. The flat parts in the cargo back are awaiting the opportunity to bend when I print it out. Could claim it a result of traffic accident. A tank smashed it from behind at a traffic stop. It happens every day.
|
|
|
Post by squirmydad on Oct 17, 2017 17:59:13 GMT -9
|
|
|
Post by Papercraft Warrior on Oct 17, 2017 18:50:44 GMT -9
Thank you. This one is available a few posts above, Vermin King linked it. It is as good as his, so free cookies for both of you. If you come across mod files for any Ebbles/Genet jeep/truck I am interested in them (if Chris is OK with it). Make no importance of it, just if it comes along while you are searching your harddrive for other items.
|
|
|
Post by squirmydad on Oct 29, 2017 10:02:51 GMT -9
Thank you. This one is available a few posts above, Vermin King linked it. It is as good as his, so free cookies for both of you. If you come across mod files for any Ebbles/Genet jeep/truck I am interested in them (if Chris is OK with it). Make no importance of it, just if it comes along while you are searching your harddrive for other items. Found it - edit> files moved to here; onemonk.com/guest-dl.html
|
|
|
Post by Papercraft Warrior on Oct 29, 2017 10:24:41 GMT -9
Thank you. Might not turn out perfect, but seems manageable with thin paper. When I go to the printshop, I'll put out for one of these amongst the various models.
|
|
|
Post by squirmydad on Mar 16, 2022 20:21:59 GMT -9
|
|